AIR PRESSURE FIXED HEIGHT The aerodynamic principle is applied to design the blades to provide strong power and self-stability, sensing the surrounding environment and guaranteeing stable hovering of the aircraft in outdoor flight.
OPTICAL FLOW POSITIONING Optical flow positioning mode toggle switch.Optical flow positioning works best when flying in a strong light, clear pattern, low wind environment, and maintaining a height of about 1.5 meters. The strong reflection, transparency, unclear lines, disordered lines and flying on the water surface will affect the effect of optical flow positioning.
HOVER DEBUG MODE WHEN THE AIRCRAFT IS YAWING, YOU CAN ADJUST THE AIRCRAFT TO THE BEST HOVERING CONDITION THROUGH THE DEBUG MODE.CARBON BRUSH MOTOR Use 050 carbon brush motor with heat sink protection, make the motor life longer.Upgrade to 2.4G high-frequency signal and 80-100m long distance remote control,making the control still stable and sensitive.
FLIGHT CONTROL SYSTEM Precautions for frequency matching operation of external receiver: the remote controller must be in four axis mode or fixed wing mode with conventional layout, and cannot have mixed control parameters. By default, channel5 is the optical flow switch. It is recommended to remove the main propeller and unplug the motor plug before frequency alignment, So as to prevent the reverse channel from causing the aircraft to self transmit and fail to fly.
FOUR-CHANNEL DESIGN With 6-axis gyroscope, low-voltage alarm,large and small rudder conversion, air pressure fixed height, optical flow positioning function, very stable flight, so that the product is easier to control,more suitable for novice operation.ONE TOUCH TAKEOFF AND LANDING.2.4GHZ REMOTE CONTROLLER
Tips from sellers: We high recommend:1. that you watch the video and read our description carefully before you buy it. 2.Buy more batteries model or more batteries for spare, it will bring you more fun considerig one battery it only work 8 mins around
Notices: 1. When the battery runs out, try to charge it in time to make sure the battery has the remaining power. If the battery is completely empty, it will not charge 2. Disconnect from the remote control car while charging. You need to take the battery out and charge it separately 3. If you do not use the remote control car, please disconnect the battery from the wire of the remote control car, do not connect, and fully charge the battery, otherwise it will damage the battery